LCD Display Change.

First you will have to remove the plastic bezel that surrounds the LCD screen. You can use your fingers to lift it up and then remove it.

Removing the bezel

Next remove the 6 screws at the red arrows shown in the picture below.

Removing the screen screen

Once the 6 screws are removed, you will be able to lift the LCD up slightly so you can access the screen bracket screws (blue in the picture below) on both sides of the LCD. Remove the 4 screws from both sides.

Side bracket screws

Then gently flip the screen over and on the back at the bottom you will find a gold connector attached to the screen. Loosen the tape covering the connector and disconnect it.

Gold screen connector

Installing your new LCD screen

Attach your new LCD screen to the gold connector and flip it back up into place.

Reattach the LCD to the brackets on both sides, and then lay it down flat and replace the 6 screws holding it in place.

Then retrieve the plastic bezel and situate it properly on the screen. Finally, run your hands along the edges of the screen, snapping the bezel back into place as you go. Make sure it is fitted correctly or it won’t snap back into place.